Request a Call Back
Minnesota Licensed Electricians

EV Charger
Installation
Minneapolis & St. Paul MN

Level 2 EV charger installation across the Twin Cities metro. Panel checks, dedicated 240V circuits, permits and inspection — installed by electricians who do this every week.

Request a Call Back See What We Install
240VLevel 2 AC
48AMax output
40 miRange / hour
1 dayTypical install
What we install

EV charger installation
across the Twin Cities

Every job starts with your electrical service, not with a product catalogue. We size the circuit to your panel and your driving, then install equipment that will still be supported five years from now.

01

Level 2 EV Charger Installation Minneapolis MN

240V at 32A to 48A, the standard for practical home charging. Adds 25 to 40 miles of range for every hour plugged in.

→ 02

Tesla Wall Connector Installation Minneapolis

Gen 3 Wall Connector installed to Tesla spec, including breaker sizing, commissioning in the Tesla app, and power sharing for two-car homes.

→ 03

Home EV Charger Installation St. Paul MN

A dedicated 240V circuit run from your panel to the garage or driveway, with the charger mounted, configured and tested the same day.

→ 04

Commercial EV Charging Station Installation

Workplace, fleet and multifamily charging stations. Site assessment, ADA-compliant placement, bollards, signage and property-manager coordination.

→ 05

EV Charger Repair & Troubleshooting

Breaker tripping, ground faults, slow charging and Wi-Fi issues diagnosed and resolved by the same crew that installs.

→ 06

Electrical Panel Upgrades & Load Management

100A to 200A service upgrades, sub-panels and smart load management for older Minneapolis and St. Paul homes.

→
By the numbers

What a proper install looks like

An EV charger is a continuous load — it pulls full power for hours at a time. These are the numbers behind a safe, code-compliant installation in a Minnesota home.

240VLevel 2 voltage required for practical home charging
32–48ATypical amperage range for residential chargers
40mi/hrRange added at 48A — full battery overnight
1dayTypical install time for a standard residential job
The process

From first call
to first charge

Most residential EV charger installations are finished in a single visit. Here is exactly what happens between your call-back request and the moment your car starts charging.

STEP 01

Electrical assessment

We review your panel, service size, available breaker spaces and the distance from the panel to the parking spot.

STEP 02

Charger & location planning

You choose the charger, or we recommend one. We confirm mounting height, cable reach and indoor/outdoor rating.

STEP 03

Circuit preparation

The dedicated 240V circuit is run in conduit or cable, the correct breaker is installed, and the permit is pulled with your city.

STEP 04

Charger installation

The unit is mounted, terminated and torque-tested. Hardwired connections are made to manufacturer specification.

STEP 05

Testing & walkthrough

We verify amperage draw, test a live charging session, then walk you through the app, scheduling and daily use.

Service area

EV charger installation
across Minnesota's Twin Cities

We focus on the Twin Cities metro so we can get to your home quickly, know your city's permit process, and keep our installation standards consistent from job to job.

MinneapolisSouth, North, Northeast & UptownView page → St. PaulHighland, Mac-Groveland & SummitView page → BloomingtonSouth Loop & West BloomingtonView page → EdinaCountry Club & MorningsideView page → MinnetonkaRidgedale & Hopkins borderView page → Maple GroveArbor Lakes & The GroveView page → PlymouthMedicine Lake & Parker's LakeView page → Eden PrairiePrairie Center & Flying CloudView page → RichfieldWood Lake & SouthdaleView page → EaganCentral Park & Cedar GroveView page →
FAQ

EV charger installation
questions, answered

How much does EV charger installation cost in Minneapolis MN?
A standard Level 2 EV charger installation with a short, accessible run from the panel to the garage typically falls between $900 and $1,800 for labor, materials and permit. Longer conduit runs, panel upgrades and outdoor trenching add cost. We give you a fixed price after seeing the panel and the parking location.
Do I need a 200 amp panel to install an EV charger?
Not automatically. Many homes on 100A service can support a 32A or 40A Level 2 charger once the load calculation is run, especially with a smart load management device. If the panel cannot carry the load, we tell you during the estimate and quote the upgrade separately.
How long does a home EV charger installation take?
Most residential installations are completed in a single visit of four to eight hours. That includes running the circuit, mounting the charger, terminating the connections and testing a live charging session. If your install requires a panel upgrade or a long underground run, it may be scheduled across two visits.
Do you install Tesla Wall Connectors in Minneapolis and St. Paul?
Yes. We install the Gen 3 Tesla Wall Connector to Tesla's specification, including the correct breaker size and commissioning through the Tesla app. We also set up power sharing between two Wall Connectors on one circuit if you have two Teslas.
Can I install an EV charger on the outside of my garage?
Yes. Outdoor installations are common across the Twin Cities, especially for driveway parking. We use weather-rated equipment, proper conduit and fittings that hold up through Minnesota winters, freeze-thaw cycles and snow load.
Do you handle the permit and inspection?
Yes. New EV circuits require an electrical permit in Minnesota. We pull the permit with your city — Minneapolis, St. Paul or the surrounding suburbs — schedule the inspection and meet the inspector on site. You do not need to file anything yourself.
What if I already bought a charger?
That is fine. We install customer-supplied equipment regularly. Send us the model number with your call-back request and we will confirm the correct circuit size, breaker and mounting requirements before the visit.
Request a Call Back

Talk to an EV charger
electrician in Minnesota.

Tell us where the charger is going and what your panel looks like. We will call you back with a clear scope and a fixed price — not a range that changes on install day.

  • info@evchargeinstallguysmn.comEmail or use the form to request a callback.
  • Mon–Sat · 7am – 6pmWe respond within one business day.
  • Twin Cities MetroMinneapolis, St. Paul, Bloomington, Edina, Minnetonka, Maple Grove, Plymouth, Eden Prairie, Richfield, Eagan.

We call back within one business day. No spam, no sales pressure.